Re: Ring size question

[Gary <mopar413@xxxxxxxxxxx>]

Just take some of the rings and install them in the bore and see what kind of a gap you have between ring gaps.  That is the easiest way to check them.  If you have a 1/8" gap or a little more then no problem.
---- chymar01@xxxxxxxxxxx wrote: 
> 
> 
> So, they are used in a standard bore that is worn without boring? 
> 
> Mark 
> 
> ----- Original Message ----- 
> From: "Don Dulmage" <big-d@xxxxxxxxxxxx> 
> To: 1962to1965mopars@xxxxxxxxxx 
> Sent: Tuesday, December 23, 2008 4:59:38 PM GMT -05:00 US/Canada Eastern 
> Subject: Re: Ring size question 
> 
> 
> Made for worn bores 
> ----- Original Message ----- 
> From: <chymar01@xxxxxxxxxxx> 
> To: <1962to1965mopars@xxxxxxxxxx> 
> Sent: Tuesday, December 23, 2008 3:55 PM 
> Subject: Ring size question 
> 
> 
> > 
> > 
> > List, 
> > 
> > I bought a set of rings off eBay. Supposed to be standard size 440. 
> > When I got them, the box says "std -.010". 
> > Perfect Circle 50722 
> > 
> > Does this mean they're undersized? 
> > 
> > Mark 
> > 
> > [Non-text portions of this message have been removed] 
> > 
> > 
> > ---- 
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person. I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic. Thanks! 
> > 
> > '62 to '65 Mopar Clubhouse Discussion Guidelines: 
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > 
> > 
> 
> 
> ---- 
> Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines: 
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.