Re: Block Markings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Block Markings




According to my book, that means .008 oversized lifter bores. 


----- Original Message ----- 
From: "Bill" <Y1TopBanana73@xxxxxxxxx> 
To: "62-65 Mopar List" <1962to1965mopars@xxxxxxxxxx> 
Sent: Monday, December 22, 2008 10:12:39 PM GMT -05:00 US/Canada Eastern 
Subject: Block Markings 

So I finally got off my lazy a$$ and am doing the cam in the 
Coronet.In tearing it apart I noticed a diamond stamped in the block 
on the block deck surface, in front of the left head, up near the 
intake. Does this have any significant meaning? I know the short block 
in this car is not original. 

Thanks 

Bill M 
65 Coronet 500 'vert 

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.