Re: undercoating removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: undercoating removal



Eastwood makes a product called,"Under Gone" that I used on my
undercoating. Not so good on really heavy buildup but if you get part of
it off it works real well. It's biodegradable non-toxic and takes off
everything like oil, wax, most oil based undercoating etc.

Bill C.
On Fri, 21 Nov 2008 19:22:33 -0700, "Wakeman Massie" <wakey@xxxxxxxxxxx>
said:
> 
> 
> Hi Everyone..
> 
> Who has undercoating removal tips?   For 15 years I've been doing the
> heat, scrape + heat, wire brush, finish with solvent method.
> 
> Where warpage is of little concern, this method of heating the
> undercoating to soften it has been fine (floors and inner fenders). It
> hasn't been so great on quarters and outer fenders, I've had warpage
> issues before and don't want to go there again.
> 
> Current project is a '62 Dart with godawful thick, cracking,
> thrice-oversprayed undercoating that needs to go.  I've never found a
> solvent tough enough to soften this stuff without heat.
> 
> Anyone have some tricks?
> 
> Thanks
> 
> Wakeman
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
-- 
  William Cole
  wedge64@xxxxxxxxxxx

-- 
http://www.fastmail.fm - A fast, anti-spam email service.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.