What about the angled plugs and their location? They look like small block heads. spicemanii@xxxxxxx wrote: > > > Forgot one more comment, the cooling system was possibly a reverse > cooling system and their possibly was another intake system on it and > this would explain the block off plates in the end of the heads, joe > > > -----Original Message----- > From: Jeff Adams <ledman_70@xxxxxxxxxxx> > To: 1962to1965mopars@xxxxxxxxxx > Sent: Mon, 13 Oct 2008 9:12 am > Subject: ID this motor? > > > > > Anybody else check this out yet? I assume it's a motorhome motor due to > the blocked ports at the ends of the heads, but do motorhomes have > angled plug heads? > http://cgi.ebay.com/ebaymotors/CHRYSLER-413-MAX-WEDGE-412HT-BIG-BLOCK-ENGINE-RUNS_W0QQitemZ170271118642QQihZ007QQcategoryZ6763QQssPageNameZWDVWQQrdZ1QQcmdZViewItem > > > > Jeff Adams > 64 Polara > > > ---- > Please address private mail -- mail of interest to only one person -- > directly > to that person. I.e., send parts/car transactions and negotiations as > well as > other personal messages only to the intended recipient, not to the > Clubhouse > public address. This practice will protect your privacy, reduce the > total volume > of mail and fine tune the content signal to Mopar topic. Thanks! > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html. > > > > [Non-text portions of this message have been removed] > Jeff Adams 64 Polara ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.