Re: A body turn signal switch?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: A body turn signal switch?




Yes sir, more or less. there is a plastic plate assy in there with a pivot, contacts and wires. the cam is attached to the signal arm and pivots on the plate. What you are decribing is consistent with the cam collapsing.

Cheers

Wakeman

62 Dart (in resto)
64 Dart (driver)

----- Original Message ----- From: "Gary H." <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, October 08, 2008 8:41 PM
Subject: Re: A body turn signal switch?



Thanks, yes I know David. -- Is the cam the plastic piece the turn signal arm attaches to? Apparently the person lifted the turn signal arm and something inside broke.

Thanks,
Gary H.

-----Original Message-----

If you are talking about the turn signal cam - the part that wears out - the source is David Koldos, 847-888-2652. He works at a plastic plant and makes
these on the side.  they fit all '62 - '66 A,B,C cars.

Wakeman

62 Dart (in resto)
64 Dart (driver)

----- Original Message ----- From: "Gary H." <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, October 08, 2008 6:15 PM
Subject: A body turn signal switch?



Someone was asking me if the plastic part that the wires and turn signal
arm are connected to on a 1965 Valiant is available repro? Or is it the
same as later 60's - early 70's A bodies or other Mopars & availability?
Anyone know?

Thanks,
Gary H.


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.