Don Dulmage wrote: > > > Why dont you switch to points right now and get that issue out of the > way. Unless it is wired worng it should not be an issue. Something > doesnt make sense. It would seem to me the ballast resistor is suppling > voltage for the cantrol box. it is suposed to be after the box and > dropping coil voltage. The box should see battery voltage on the pointy > end wire Speaking of Battery voltage what is it when you are driving? > Don > [Non-text portions of this message have been removed] > ================================================================== Remember we only have an ammeter and it shows charge most of the time. It was dramatic though when I turned the light switch for the dome light and the car started stumbling/missing very badly. It took it 30secs to clear up after I shut that off. I had blown the dash light fuse also a couple weeks ago. I do have issues there. I do have a voltmeter. Maybe I should attach it to the ign box input side to see what it really gets. I can re-install my original single point dist but it needs some TLC and I can't find the leads for my dwell meter. My step-son borrowed it. Need I say more? I'll see what I can do. Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.