Nick; Any parts store should have a stock of various T fittings, look through what they have and match up the size you need. Pull hose off intake nipple insert the T reinstall the hoses. You want a female end to fit over the nipple and the other two male ends to fit the two hoses. If needed their are vacuum canisters on the market to keep your heat controls suppled with sufficient negative pressure at idle. Herb 1963 Fury 2D/HT ? Yet 1963 Sport Fury Convertible 361 1970 Challenger RT 440 1999 Durango SLT 5.9 2006 300-C Heritage 5.7 2008 SRT-8 Magnum 6.1 St. Louis, MO. -------Original Message------- From: Nick Tiberio Date: 8/26/2008 12:16:12 PM To: 1962to1965mopars@xxxxxxxxxx Subject: RE: Max Wedge Vacuum Supply Rich, I have no ports on my intake manifold as on our Polys. I run manual Chokes, heater/defroster. Coming home from cruise nights now at 9pm are Starting to require a little defroster use. Where did our summer go. Nick Tiberio FuryUs63 ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx u/?bUrDWg.bSONJP.YXJjLjYy ?p=TEXFOOTER