RE: Max Wedge Vacuum Supply

[Nick Tiberio <furyus63@xxxxxxxxxxx>]

Brian,

There are no vacuum ports on my manifold. My PCV runs from my right 
valve cover to the right carb dedicated port.

Nick Tiberio
FuryUs63





Brian Schlump wrote:
> 
> Nick,
> Does your engine have a vacuum connection for the pcv on the rear side 
> of your intake manifold?   If so, you should swap it for one that has 
> the hose connection to the pcv plus a small connection for the heater 
> vacuum hose.   These show up occasionally on eBay, or one of the members 
> 
> here may have a spare he can sell you.
> 
> Nick Tiberio wrote:
> > 
> > I need to supply vacuum to my heater control switch. Is anyone running a 
> > 
> > 
> > Max Wedge with a working heater/defroster. My vacuum line is just coiled 
> > 
> > 
> > up on the firewall and the only suppy I can see is from my right side 
> > carb. The left carb is supplying vacuum to my distributor. The vacuum 
> > line to the control switch is also a smaller diameter hose that will not 
> > 
> > 
> > fit the port on the carb. Is it as simple as using a reducer to mate to 
> > different size lines. I'd like some ideas of what works...Thanks
> > 
> > Nick Tiberio
> > FuryUs63
> 
> 
> 
> '64 Belvedere
> Davenport, Iowa
> 
> "The difference between ordinary and extraordinary is that little 
> extra."



furyus63


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.