RE: A833/727 yoke interchange

[Jeff Adams <ledman_70@xxxxxxxxxxx>]

Thanks for the info guys. I'm going to dolly home a 68 Sport Fury Friday 
and need something to stuff in the tranny so I don't leave a trail of 
breadcrumbs for anyone to follow me home.
Dave Casey wrote:
> 
> Yes. And assuming the 833 is not a short A-body unit, the drive shaft 
> length 
> should be the same.
> 
> Dave Casey
> 
> ----- Original Message ----- 
> From: "Jeff Adams" <ledman_70@xxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Wednesday, August 20, 2008 10:41 AM
> Subject: A833/727 yoke interchange
> 
> 
> >
> > I know we've discussed before, but refresh my memory. Will the front
> > yoke from an A833 OD fit a '68 big block trans automatic?
> >
> > Jeff Adams
> > 64 Polara
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --  
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> > 
> 



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.