273 cam question

[moparbikeguy@xxxxxxx]

There is probably more interest in slant 6's than in 273's, but hopefully Don or someone else can recommend a cam for my mini V8. The engine is a completely stock 1967 273 2bbl. It has been fitted with a Holley street dominator and a 600 vacuum secondary carb. It retains the stock 8.8 compression ratio, exhaust manifolds, 904 trans and has 4.10 gears with 28" tires. I just want to upgrade the hydraulic cam for racing at the local dragstrip, and very limited street driving. I'd like to keep the hydraulics and not go solid.


'65 Coronet 500 stroker

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.