Jim, Roger Gibson Restoration lists the correct hose, but no clamps. I think that I purchased a clamp at AutoZone in their selection of "Helps" parts....Brian Jim Altemose wrote: > > The radiator shop lost my rubber run-off hose and clips. Anyone know > of a good source for replacement, particularly the clips? It's for a > 63 Polara 500 with a 383. > > FYI, I just finished replacing my 5/16 fuel line with a 3/8 from > In-Line tube. I was very impressed with the quality and how well it > fit. I also re-coated the inside of my gas tank while I was at it > with the Eastwood kit. That went well also. > > Thanks. > > - Jim > Jim Altemose, Long Island, NY > '63 Polara 500 (Max Wedge) > '63 Polara 500 (383) > '65 Belvedere I (Street Wedge) > '71 Bronco '64 Belvedere Davenport, Iowa "The difference between ordinary and extraordinary is that little extra." ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.