I'm still a little confused on how to interpret the radiator support and trunk stamping. My 63 Polara has "M 37 1" very clearly stamped on the radiator support. But the fender tag says: 1001 0341 642 655 MM1 and there's nothing in my VIN that would suggest a "37". Thanks. - Jim Jim Altemose, Long Island, NY '63 Polara 500 (Max Wedge) '63 Polara 500 (383) '65 Belvedere I (Street Wedge) '71 Bronco On Wed, Aug 6, 2008 at 3:50 PM, Bill Watson <wwatson6@xxxxxxx> wrote: > > > That number is the Shipping Order Number that also appears on the data tag > on the driver's side inner fender. > > It is usually prefixed by a code for the assembly plant and model year. The > VIN was not stamped on unibody cars prior to 1968. > > Bill > Vancouver, BC > > > > ----- Original Message ----- From: "Jim Altemose" <jaltemoose@xxxxxxxxx> > To: "1962to1965mopars" <1962to1965mopars@xxxxxxxxxx> > Sent: Wednesday, August 06, 2008 4:19 AM > Subject: VIN / trunk stamping? > > >> Can someone tell me how to decode the 5 digit stamp that's on the >> radiator core and on the trunk lip under the weather stripping? >> Thanks in advance. >> >> - Jim >> Jim Altemose, Long Island, NY >> '63 Polara 500 (Max Wedge) >> '63 Polara 500 (383) >> '65 Belvedere I (Street Wedge) >> '71 Bronco > > ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.