Re: Max Wedge Aluminum Fan
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Max Wedge Aluminum Fan




I am reading from the original service bulletins from Chrysler. Dec 1963All super stock eng and 426 street wedge will be eqiuped with seven bladed fan., pic shows Alum,5, FIVE RIVETS, fliud drive, non thermal 18" fan. Part no.fan 2121013, changed in 66 to part no. 2265034, vis drive part no. 2268903 . All picture show a 5 FIVE rivet fan blade. This may have changed over the years as parts were superceded to others but thwese are the correct ones for the 61, 62 ,63 64 65 years Dave O ----- Original Message ----- From: "Nick Tiberio" <furyus63@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, July 22, 2008 9:03 PM
Subject: Max Wedge Aluminum Fan



I've picked up a 7-blade aluminum fan. The seller told me that it was
used on the 426III wedge, 864 hemi, & A-990 hemi. I've never come across
an aluminum fan before. I sold my '64 426III back in the 70's and
remember nothing about the fan. I'd like to use this fan on my new max
wedge

It does have several markings plus the D over C, large P over D. I see
this on many parts including my light lens. What does DCPD stand for.

I'll try to link a photo of the fan.

http://s329.photobucket.com/albums/l380/FuryUs63/?action=view&current=fan.jpg


Nick Tiberio
FuryUs63


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.