Re: Super Stock Seat Bracket Mounting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Super Stock Seat Bracket Mounting




Bolt the seats to the mounting brackets, and then place the left seat where that position is most comfortable for you.
Be sure that that position is where you really want to be.
Then mark and drill the holes.
Use that final location as a referance point to mount the remaining seat..


Pat Herman wrote:

Anyone know where to position Super Stock seat brackets to the floor of the car? I assume the outer brackets mount in the stock seat locations but it seems the inner brackets mount a distance away from the transmission hump. My car has factory bucket seats and it looks like I need to drill new holes in the floor that are outboard of the factory holes, due to the narrower seats. A diagram, measurements or advise on how other members mounted their seats would be greatly appreciated.

Thanks

Pat
1962 Sport Fury




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.