RE: where to get body panels, 64 Sport Fury

[Paul Lennemann <pjlenn@xxxxxxxxx>]

W.A.Edison wrote:
> 
> Thanks Bill. That's what I thought, but hey, the people who sell the 
> stuff
> should know what they are selling. Here is what I just heard back from 
> Coss 
> Canada, 
> 
> "Hi Mr. Edison. Thank you for your email.
> 
> Unfortunately all our listing for patch panels start for  1965 Fury.
> 
>  Have a good day.
> 
>  
> Roger C.
> 
> Web Desk
>  
> 
> For what it's worth....... /Butch/ Ferndale, WA
> 
> 
> 
> -----Original Message-----
> From: Bill Watson [mailto:wwatson6@xxxxxxx] 
> Sent: Monday, June 23, 2008 10:59 PM
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: where to get body panels, 64 Sport Fury
> 
> 
> 
> 1964 Belvedere parts are the same as 1964 Fury parts which are the same 
> as
> 1964 Savoy parts which are the same as 1964 Sport Fury parts
> 
> ALL 1964 Plymouths (Savoy, Belvedere, Fury and Sport Fury) shared the 
> same
> body.
> 
> It was not until 1965 that the Belvedere and Fury used different bodies.
> 
> Also, the Coronet was not built in 1963 or 1964.   This firm is 
> confused!!!
> 
> Bill
> Vancouver, BC
> 
> 
> 
> ------ Original Message -----
> From: "Butch Edison" <waedison1@xxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Monday, June 23, 2008 8:59 PM
> Subject: RE: where to get body panels, 64 Sport Fury
> 
> 
> >
> > My bad Gary. I was trading emails with Sherman Auto who told me that the
> > Belvedere parts are not the same as Fury parts and they don't have Fury
> > patches. I've sent an inquiry to Cross Canada. I did find a complete 
> > right
> > front fender section at JC Auto in Lynwood, WA, and will be going in 
> > Friday
> > to look at it.
> >
> > Thanks/Butch/ Ferndale, WA
> >
> > -----Original Message-----
> > From: spigot2039@xxxxxxxxxxx [mailto:spigot2039@xxxxxxxxxxx]
> > Sent: Monday, June 23, 2008 7:36 PM
> > To: 1962to1965mopars@xxxxxxxxxx
> > Subject: RE: where to get body panels, 64 Sport Fury
> >
> >
> > Hum...The Fury parts are listed as 1964 Belvedere. Look at this link: 
> > (You
> > may have to log on their home page as a guest for the link to work.)
> >
> >
> http://www.crosscanadaparts.com/cgi-bin/crosscanada/product_list.html?img_nu
> 
> > m=185
> >
> > Thanks,
> > Gary H.
> >
> > -----Original Message-----
> >
> >>
> >>FYI in case you have to go looking... Cross Canada does not have any
> >>patches for 64 Furys.
> >>
> >>/Butch/ Ferndale, WA
> >>
> >>-----Original Message-----
> >
> >>
> >>Look at http://1962to1965mopar.ornocar.com/restore2003.html in the
> >>"Sheet metal" section. It seems to me I recall reading that "Cross
> >>Canada" makes the sheet metal -- everyone else distributes their items.
> >>Only patch panels were available last time I looked.
> >>
> >>Thanks,
> >>Gary H.
> >>
> >
> >
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and 
> negotiations
> as well as other personal messages only to the intended recipient, not 
> to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to 
> Mopar
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
I bought the repair panels for my '63 from Kramer's.  They list a number 
of panels for '64 'B' Bodies.  Here's the link:  
http://www.kramerauto.com/62-5.htm


Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.