Re: Alternator / A/C pulling mounting?

[Jim Altemose <jaltemoose@xxxxxxxxx>]

By jove I've got it.  Sometimes you just need to walk away and come
back later and it hits you like a shot.  The A/C pulley bracket fits
right into the alternator bracket and shares all three holes.  Duh.

- Jim

On Tue, Jun 17, 2008 at 3:44 PM, David orr <fe2orr@xxxxxxxxxxxxxx> wrote:
>
> The bolts fopr the alt go thru sleeves to fill the void  Dave O
> ----- Original Message ----- From: "Jim Altemose" <jaltemoose@xxxxxxxxx>
> To: "1962to1965mopars" <1962to1965mopars@xxxxxxxxxx>
> Sent: Tuesday, June 17, 2008 11:46 AM
> Subject: Alternator / A/C pulling mounting?
>
>
>> I'm embarrassed to ask this, but I'm pulling my hair out.  I have a 63
>> Polara with a 383 and A/C, which is disconnected.  To change my fuel
>> pump, I pulled my alternator and bracket, and also a single pulley on
>> a bracket that I assume is for my disconnected A/C.  I didn't take
>> pictures because I figured it must be totally obvious to anyone with
>> half a brain how it all goes back.  Guess I'm down to a quarter brain.
>> I have three 2-inch bolts (1 inch threaded and 1 inch smooth) that I
>> thought were obviously for the alternator bracket, but they're too
>> long and I'm assuming they didn't spontaneously grow.  I have a single
>> shorter bolt that I thought was from the A/C pulley bracket.  Maybe I
>> or one of my kids misplaced a couple of bolts?  I suffer from CRS
>> (can't remember you-know-what), so I'm not sure where the A/C bracket
>> mounts and it's not obvious to me.  Do the A/C bracket and alternator
>> bracket share a couple of the same holes?
>>
>> Does anyone have a picture or two?
>>
>> As always, thanks.
>>
>> - Jim
>> Jim Altemose, Long Island, NY
>> '63 Polara 500 (Max Wedge)
>> '63 Polara 500 (383)
>> '65 Belvedere I (Street Wedge)
>> '71 Bronco
>>
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.