Don, Summit Racing sells two Griffin aluminum downflow radiators that are direct-fit into a 1965 Belvedere or one for a 1965 Coronet, for $500. I just got one, and it has a rounded top and is very cool. If painted black, it might pass for a factory radiator, and the construction looks first rate. I'm thinking they will fit any early B-body, probably. Mine's going into my 1964 Fury. The two for the Belvedere have their hose connections in different places, one of the three should work. Mancini Racing sells them for fifty more, but you have to provide many, many measurements to them. The Griffin tech told me his would bolt right up, and the Griffin sure looks a lot nicer. Sean Don Dulmage wrote: > > I am going to find a new rad shop . At 450 for the original build and 100 per year repair I could have had a real one right up front. ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.