The oil pump & timing gear set is the same application for the 62-66 Poly 318 as the later 318/340 LA engines. The early 277-318 Polys (1956-61) use a different oil pump but even these early engines use the same timing gear set (chain & gears).
Gary Pavlovich----- Original Message ----- From: <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Tuesday, May 13, 2008 6:55 PM Subject: Re: A engine versus LA engine
See http://1962to1965mopar.ornocar.com/poly318_1.html for interchange. The A 318 engine is noticeably wider than the LA version. Gary H.-----Original Message-----Is there any difference between the oil pump and timing gears and chain for a 1964 318 'A' engine versus a 318 'LA' engine? Just wanted to know before the mechanic that is going thru my engine replaces it with maybe the wrong one. Also are there any other noticeable differences between the 2 engines besides the valve covers? Thanks in advance Wayne Huseby 64 polara 500 2dr ht----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!'62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.