Marcus and Joey, The 59 to 63 sure grips will interchange with the 64 and up sure grips. It's the 59 to 63 open rears that used a different length axle. That's why you have to shorten the axles to put a sure grip (any sure grip) in a pre 64 car that was originally equipped with an open rear end.
Dan----- Original Message ----- From: "Marcus Edell" <marcusedell@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Sunday, May 11, 2008 4:41 PM Subject: Re: cross ram
Pre 64 sure grips only will swap with each other..you can use later 742's 489's by shortening the tapered axles about 1/16" inch--Marcus"Hot Rod"Edell-The RevTones www.myspace.com/revtones www.revtones.net-------------- Original message -------------- From: Joey <jake4@xxxxxxxxxx>All of the spare parts are going with the car, excuse my ignorance but what is the difference in the sure grips between tapered and non-tapered rears.Joey
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.