Disc Brakes!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Disc Brakes!



Does anyone know if the front spindles from the disc brake setup off the
A bodies is the same as the B bodies?
Only reason I'm asking is that I have the A body disc brakes on my 64
Sport Fury now but I think I'm going to get the MP brakes 4 wheel brake
system and I'm wondering if I have to get the kit they sell that has the
spindles included or can I use the spindles I have and just get the
rotors, pads, hoses, etc to save a little money. If they are the same
fine, if they are different, what about the ball joints that I already
have? Will they be the same?
Thanks for any info.

Bill C.
-- 
  William Cole
  wedge64@xxxxxxxxxxx

-- 
http://www.fastmail.fm - Does exactly what it says on the tin


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.