Secondary butterflies
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Secondary butterflies





Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

I was just pondering what would happen if I was to remove the vacuum 
operated secondary butterflies from my pair of 500cfm Eddy's? The 
secondary side has two sets of butterflies. The set that is inline with 
the primary butterflies is mechanical linkage and a second set is up in 
the venturi and is vacuum operated. I guess I was pretty carb dumb until 
I started messing with these. I jave drilled the counterwieghts per 
Edelbrock tech line but I'm thinking that there'd be more flow without 
that interior set getting in the way. I know I'm gonna get spanked on 
this one but what about it?


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.