Re: 64 Plymouth Steering Column Length
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 64 Plymouth Steering Column Length



I have a Borgenson joint on mine and it worked out well.
Joey
----- Original Message -----
From: "Jorge" <fury64@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, March 26, 2008 1:07 PM
Subject: Re: 64 Plymouth Steering Column Length


> I actually tried to use the flaming river setup and it was way too
> long, I couldnt cut it short enough. I assume they are meant for later
> cars.
>
> On Wed, Mar 26, 2008 at 5:41 AM, Dan McCormack <mcwheels@xxxxxxxxxxxxxx>
wrote:
> >
> >  Firm Feel has the adapter to do this but if you ask me it's kind of
pricey.
> >  Actually I've been told that this adapter is a stock Mopar part that
was
> >  used on Dodge vans. I know I've seen used ones for sale on Ebay.
> >
> >  http://www.firmfeel.com/column_adapt.htm
> >
> >  It seems like the Flaming River set up is giving you more for around
the
> >  same money.
> >
> >  Dan
> >
> >
> >
> >
> >  ----- Original Message -----
> >  From: <spigot2039@xxxxxxxxxxx>
> >  To: <1962to1965mopars@xxxxxxxxxx>
> >  Sent: Wednesday, March 26, 2008 9:24 AM
> >  Subject: Re: 64 Plymouth Steering Column Length
> >
> >
> >  >
> >  > Flaming River sells a Mopar Power to Manual Coupler Kit #16141
> >  >
http://www.reillymotorsports.com/store/product.php?productid=16141&cat=0&pag
e=1
> >  >
> >  > But I don't know if it is adaptable to pre-66, though that may be
> >  > workable, as in
> >  >
http://www.1962to1965mopar.ornocar.org/ml-houstons-steeringcoupler.html
> >  >
> >  > Maybe someone else here knows. . . .
> >  >
> >  > Thanks,
> >  > Gary H.
> >  >
> >  > -----Original Message-----
> >  >>Yes I am converting from power steering to manual. I would like to
get
> >  >>a new column shaft and replace the coupler with a u joint.
> >  >>
> >  >>On Tue, Mar 25, 2008 at 4:29 PM,  <spigot2039@xxxxxxxxxxx> wrote:
> >  >>>
> >  >>>  This has been discussed before here but I can't seem to find the
> >  >>> archived discussion. Are you converting from power steering to
manual?
> >  >>>
> >  >>>  Thanks,
> >  >>>  Gary H.
> >  >
> >  >>>  -----Original Message-----
> >  >
> >  >>>  >Anyone know the Length of a manual steering column shaft on a 64
> >  >>>  >plymouth fury? Or the difference in length from a power steering
> >  >>>  >column and a manual steering column?
> >  >>>  >
> >  >>>  >thanks,
> >  >>>  >Jorge
> >
> >
> >  ----
> >  Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
> >
> >  '62 to '65 Mopar Clubhouse Discussion Guidelines:
> >  http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> >
> >
> >
> >


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.