Re: "Sport Fury" script removal

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

Those are speed nuts and once they're pushed on they sometimes tend to 
stretch and not want to start unscrewing. Try geting your're fingernails 
under the emblem and pulling it away from the trunk as you turn the wrench. 
Putting pressure on it will some times get the nut to grab and start to 
unscrew.

Dan


----- Original Message ----- 
From: "Douglas Sutherland" <pluckedchickens@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, March 03, 2008 11:26 AM
Subject: "Sport Fury" script removal





I'm trying to remove the "Sport Fury" script nameplate from my trunk lid.

Do I need a special socket to take off those "hollow" metal nuts?.

I'm trying to work through the holes in the inside of the trunk -- which 
makes it difficult to see.  Looks like a 3/8's nut, but even a my deep well 
socket won't grab it.

Thanks,
Doug


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.