Re: carb whistle

[Gary Pavlovich <glpavlovich@xxxxxxx>]

Worn throttle shaft that goes through the carb base.  These can be bushed 
during a rebuild.
Gary Pavlovich
----- Original Message ----- 
From: "Sean B" <polecat2@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, February 17, 2008 3:41 PM
Subject: carb whistle


> We put a used 360 in my friend's car today, with a freshly-rebuilt
> Thermoquad.  There is no ported vacuum line on this carb, so we hooked
> the distributor vacuum advance to a nipple on the carb base.  It now
> whistles until we give it the slightest amount of throttle.  The whistle
> will even stop when we just jiggle the throttle shaft on the carb.  When
> we unhook and plug it back up, the whistle goes away.  Any ideas?
> Thanks,
>
> Sean
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.