Pat I guess I started this when I was looking at the hoods on my 63 Fury and 64 Belvedere. Even though the cowls, windshield and dash are completely different between the 2 years the front edge of the cowl and the hoods appear to be exactly the same.
Nick I'll bet I know what you're thinking. I too like the front end of the 63 better but I like the roof of the 2 dr hardtop on the 64 better.
Dan----- Original Message ----- From: "Pat Herman" <dart1962_440@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Thursday, January 31, 2008 5:54 PM Subject: RE: 64/65 plymouths
Nick, Isn't the cowl in 62 - 63 "V" shaped and in 64-64 "straight"? If so the area where the hood meets the cowl may not line up. If you find someone who has put the 63 front on a 64 body, try to get some pics of this area and ask how they addressed it. Pat Nick Adamski wrote:Hello. I said in a previous post that i was thinking about putting a 63 plymouth front end on my 64 fury. The reason i want to do this is i like both cars and there is feature on voth cars i like. But i like the 63 front end better then the 64. I know gary saind that it's a dirct bolt but i think you have a 65 plymouth . Is there any major differnces between the 64 and 65's?Before I go buying the 63 front end parts I would like to know if it would fit with no major problems. Did anyone on this list attemp to put a 63 front on a 64 plymouth before? Any help would be greatly appricated. thank's nick
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.