RE: idler arm
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: idler arm




cathie waring wrote:
> 
> 
> hi, am in the process of replacing some worn out parts on the 
> steering/front suspension on my 63 dodge. am having trouble convincing 
> the idler arm to let go. my natural intincts are screaming "use a bigger 
> hammer". how much force can you put on the arm without damaging 
> something else, such as the inner tie rod end, or bend the link?should 
> both front wheels be off the ground? any advice much appreciated, 
> thankyou, richard. [oz]
> [Non-text portions of this message have been removed]
> 

I used a 3 finger puller,not a BFH.

  Dave Walters
  Denver, Co.

  


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.