RE: splash shields
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: splash shields



Are you looking for the splash shields at the front of the wheel well 
covering the turn signal assy?  Or the one at the back?  I just bought a 
set of rears from a salvage yard in Albeta, CAN., which were listed on 
eBay.  Since these are not being repopped as you know, a salvage yard is 
about your only source.  You might try Desert Valley Auto Parts in 
Phoenix at:  dvap.com  If they can't help you you can go to the tech 
archives at:  moparmusclemagazine.com  And there are two articles about 
good Mopar salvage yards which should give you more options to check 
out.  Good Luck!

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html

DD18436572@xxxxxxx wrote:
> 
> 
> does anyone out there happen to have a set of splash shields for a 63  
> Fury?  
> 
> 
> 
> **************************************Check out AOL's list of 2007's 
> hottest 
> products.
> (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
> 
> 
> [Non-text portions of this message have been removed]
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.