Re: Heat transfer questions

[Gary Pavlovich <glpavlovich@xxxxxxx>]

Rich,
Where can one purchase 1" phenolic spacers for $31 each?
I would like to get a couple of them.

Thank you,
Gary Pavlovich

----- Original Message ----- 
From: "Richard Kinsley" <r.kinsley@xxxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, November 30, 2007 4:20 PM
Subject: RE: Heat transfer questions


> Well since the 4 hole Edelbrock, 1" phenolic spacers are only $31 each,
> if they work don't bother with the extra work of trying to fab
> something.
>
> Rich Kinsley '64 Dodge Polara 4 dr 318poly w/goodies
>
>
> Tom Watters wrote:
>
> > I think thats why I was told to use Phenolic spacers, was because
> > aluminum transfers, and wood, no matter how hard has pores in it.  I
> > didnt think phenolic spacers were wood.  I thought they were layers of
> > pressed canvas in polyurethane or some other plastic compound.
> >
> > I dont see why you couldnt use wood, though, if hard enought and sealed
> > with something that wouldnt melt under the temperatures.
> >
> > --Tom
> > On Thu, 29 Nov 2007 12:26:08 +0000, ledman_70@xxxxxxxxxxx said:
> > >
> > > If I were going to make my own, I'd use Maple instead of Oak...it's
> > > harder, won't split as easy, and more impervious to liquids.
> > >
> > > Richard Kinsley wrote:
> > > >
> > > >
> > > > Greg Parsons wrote:
> > > > >
> > > > > OK,
> > > > >
> > > > > 1/2 thick red oak, a hole saw just a bit larger that the bores of 
> > > > > the
> > > > > carb and some polyurethane to seal the wood.  I would just make my 
> > > > > own
> > > > > it is was me.
> > > > >
> > > > > Greg
> > > > =====================================================================
> > > >
> > > > You do have apoint there Greg. I don't know if a solid piece of wood
> > > > would be so good though. It'd be real easy to split and cause a pesky
> > > > leak. They usually have laminated wood which is probably to keep it
> > > > straight and help prevent leaks. The polyurethane might solve that 
> > > > issue
> > > >
> > > >
> > > > though.
> > > >
> > > >
> > > > Rich Kinsley  '64 Polara 4 dr 318poly w/goodies
> > >
> > >
> > >
> > > Jeff Adams
> > > 64 Polara
> > >
> > >
> > > ----
> > > Please address private mail -- mail of interest to only one person --
> > > directly to that person.  I.e., send parts/car transactions and
> > > negotiations as well as other personal messages only to the intended
> > > recipient, not to the Clubhouse public address. This practice will
> > > protect your privacy, reduce the total volume of mail and fine tune the
> > > content signal to Mopar topic.  Thanks!
> > >
> > > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> > >
> > --
> > '65 Dart GT 'vert
> > Tom Watters
> >
> >
> > --
> > http://www.fastmail.fm - Access your email from home and the web
>
>
>
> Rich Kinsley  '64 Polara 4 dr 318poly w/goodies
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.