RE: Heat transfer questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Heat transfer questions




Greg Parsons wrote:
> 
> OK,
> 
> 1/2 thick red oak, a hole saw just a bit larger that the bores of the 
> carb and some polyurethane to seal the wood.  I would just make my own 
> it is was me.
> 
> Greg
=====================================================================

You do have apoint there Greg. I don't know if a solid piece of wood 
would be so good though. It'd be real easy to split and cause a pesky 
leak. They usually have laminated wood which is probably to keep it 
straight and help prevent leaks. The polyurethane might solve that issue 
though.


Rich Kinsley  '64 Polara 4 dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.