Re: A-727 bellhousing conversion

[Brian Safford <hzf9vv@xxxxxxxxx>]

That's what I meant ... the tail section should be good as-is I would expect

On Nov 26, 2007 4:36 PM, Jimmy Peavy <peaver63@xxxxxxxxxxxxxx> wrote:
>
> You can swap the internals from a small block to a big block, or visa versa.
> But I don't see how you can swap bellhousings, since the bellhousing is
> cast into the case.
>
>       Jimmy
>
>
> Brian Safford wrote:
>
> >I've heard that it is possible to swap the bellhousing on an A-727
> >tranny with one from a B-727 so that it will mate up with an RB motor.
> >
> >I'd like to get the group's thoughts about doing that instead of
> >acquiring a push button B-727 tranny, as my A-727 has been recently
> >rebuilt, has a Frank Lupo 2800 stall converter and a Transgo shift kit
> >that I'd like to use.
> >
> >The motor will be a 413 that will hopefully produce around 500 HP.
> >
> >Thanks in advance,
> >Brian Safford
> >'62 Dart 440 4-door
> >
> >
> >
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
>