2 barrel throttle bracket is different than 4 barrell

[Lee Sumpter <leesumpter@xxxxxxxxx>]

I am in the process of switching my 64 Fury's 361 from a 2 barrell carb to
an AFB. I installed an intake and carb from a 65 Chry 383. Now, I find that
the AFB is wider than the original 2 bbl carb, and the accelerator cable and
kickdown linkage don't line up. My parts manual calls for a different part
number on the bracket for 2 bbls and 4 bbls, but does not show a good
picture of the difference. This is the bracket that bolts to the left rear
intake manifold bolt that has the cable clamp and the U shaped guide for the
kickdown linkage. Does anyone on here have a good picture of one of these
that you know to be the correct 4 bbl bracket? I need to know exactly what I
am searching for, or to see if I can modify my original bracket to work.

Thanks for your help,
-- 

-- 
Lee Sumpter

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.