RE: Mixed up valves

[Scott Powell <skpowell@xxxxxxxxxxxx>]

Hey Sean,

It's so the valve guides get matched to their individual wear patterns.
Of course, all this becomes moot if the valve guides are replaced as
well.

Scott

-----Original Message-----
From: Sean B [mailto:polecat2@xxxxxxxx] 
Sent: November 8, 2007 5:38 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Mixed up valves



When doing a valve job, why is it so important to put the valves back 
where they came from?  Seems to me that they have to be perpendicular 
anyway, as they rotate.  How can it matter where they go back, 
especially after grinding new faces and seats?

Sean


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will
protect your privacy, reduce the total volume of mail and fine tune the
content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

-- 
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.7/437 - Release Date:
04/09/2006
 

-- 
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.7/437 - Release Date:
04/09/2006
 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.