RE: diff seal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: diff seal



Richard, I saw where someone else suggested an impact wrench.  That may 
work, but apparently you don't have one at home right now.  In the past 
I've had good luck using a breaker bar and using my foot against the 
bar, while laying on the floor.  I've found that my leg muscles are much 
stronger than my arm muscles.   Good luck!
Brian  


 
> hi, i'm trying to replace a leaky diff seal & cant get the nut holding 
> the yoke off. basicly cant get the car high enough to get under with a 
> long enough bar to undo the nut.  richard.



'64 Belvedere
Davenport, Iowa

"The difference between ordinary and extraordinary is that little 
extra."


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.