RE: master cylinder

[Kevin Merkley <krmerkley@xxxxxxxxx>]

Hi,

I installed a dual master cylinder on my 64 Dodge 440.  Works great.

If you have a drum system (drums on the front as well as the back) use a 
67 Coronet master cylinder.

If you have connvereted to discs on the front, use the master cylinder 
from a 74 Dart.

You may also have to use the pedal pushrod from your original master 
cylinder.  The pushrod just pulls out (it is hard to do).

K.

harry skalla wrote:
> 
> Clear DayDoes anybody know if a dual master cylinder will fit on my 64 
> Dodge 
> 440? I would like to take off the single and replace it with a dual 
> cylinder 
> , just to be safe.  Any ideas on installing it? Thanks..
> Butch 
> 
> 



Kevin R. Merkley
Thunder Bay, Ontario
64 Dodge 440 2dr HT (Cdn)


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.