Clutch Linkage Question

[Nico Over <nover@xxxxxxxx>]

I just completed the change over from auto to 4 speed on my 64 Sport Fury with
all new clutch components except for the pedal assembly and Z bar, I find that
when I push the pedal to floor it stays there and you physically have to lift
it back up. Any ideas why this might be happening? Clutch is not fully
adjusted because the engine is not ready to run yet. The clutch is a dual disc
diaphram type if that makes any difference. I seem to remember way back when
that if you remove the over center pedal spring this would fix the problem but
if that is true, it makes me wonder why the factory put the spring in the
first place. Any help would be appreciated.
Thanks in advance
Nico Over
Va. Beach, Va
64 Sport Fury
63 Dodge 440 wagon


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.