Yes, but it may depend on the year PB tranny. Others have reported here that the later model switch would not work on their PB trans Mopar, as far as I recall. Thanks, Gary H. Stevan Miner wrote: > > The 1965 switch is just a single wire switch with the later models using > > three wires. What I did with my 65 is use the later model switch and > harness. I just trimmed off the two outside wires (they're for the > reverse > lights) The center terminal is the one that grounds the starter relay > when > the transmission is in Park or Neutral. > Stevan Miner ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.