Re: Where is the fusible link in a 68 Barracuda?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Where is the fusible link in a 68 Barracuda?



Hi Greg,

I checked my '68 Service Manual and found the fuseable link on the '68
Wiring diagram for a barracuda/valiant.  Looks like it is somewhere on
the Red 10 gauge wire coming off the Starter Relay B terminal.  The wire
heads from the relay to the firewall J terminal on the Bulkhead.
(Bulkead, J terminal is Middle set - Bottom right, Or Middle Set Top
Left, Cant tell from the diagram which way it sits on the firewall.)

Its funny, its in the wiring diagrams, but it is no where in the
Electrical trouble-shooting section.  Will look at my '68 Satellite in
the morning and see if I can see where it is for you.

--Tom
-- 
'65 Dart GT 'vert
Tom Watters


-- 
http://www.fastmail.fm - I mean, what is it about a decent email service?


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.