RE: shift buttons
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: shift buttons




harry skalla wrote:
> 
> Wow!!  I figured it out all by myself. Just turned the little wheel on 
> the 
> trans. two holes clockwise. It works, and it shifts properly. Goes thru 
> all 
> the gears. Right now I'm patting myself on the back.  Thanks to all who 
> answered this email.....
> Butch
=====================================================================

Yep, the adustment is touchy. Next thing you'll experience is that when 
you go to start it sometime it won't make a peep. Then if you'll take it 
out of park, push the R button and then push the N button and put it 
back in park, it'll start. It's the neutral safety switch adjustment. 
Tough to get just right without taking off the trans pan.


Rich Kinsley  '64 Polara 4 dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.