RE: aluminum vs. cast iron
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: aluminum vs. cast iron



Are you referring to your FRIENDS vapor-locking or their CARS, cause 
this is generally 2 different issues!!!
Sean B wrote:
> 
> Will an aluminum intake manifold heat the carburetor and fuel faster or 
> slower than a cast iron manifold?
> 
> BTW, Neither my car nor my friends have any vapor lock problems since we 
> 
> installed a fuel pump heat shield, as per Don Dulmage.  Thanks, Don!
> 
> Sean



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.