Re: Original Tire Size for 65 Ply Valiant V100 225 SL/6 Query ?

[Menko <menkoj@xxxxxxxxx>]

Dennis,

try a tire that is a about 24.6" tall, I believe that was the stock diameter

MJ


On 8/10/07, Dennis Vernacchia <nojive65@xxxxxxxxxxxxx> wrote:
>
> I have a 65 Ply Valiant V100 w/ SL6 22 C.I.
>
> Can anyone tell me what the ORIGINAL tire size was
> that came on the car and if I can still get something
> similar that raises the car off the ground same height.
>
> I remember that I used to be able to crawl under
> left side of car and extend my arm to reach the oild drain plug
> and not have to jack up the car, then as years went by and
> I did not pay a lot of attention to tire size, I notice the
> car sits lower with these newfangled tires....
>
> Dennis v
> Sandy Eggo
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>


-- 
Menko Johnson
http://menko.no-ip.com/portfolio
menkoj@xxxxxxxxx


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.