If it's a 64 Dodge,it only has 3 bolts.Loosen the nut for the steering column and take that off the shaft on the box. Get a pitman arm puller and take the pitman arm off. There is a 1 3'8" nut,I think you need to remove before the pitman comes off. You definitely need a puller. --- harry skalla <moweepea@xxxxxxxxxxx> wrote: > > Clear DayHELP!!!!!! Man, I'm having the hardest time > taking off my power > steering box, is there a trick to it? I have taken > out the three bolts and > the bolt on the shaft. I get it to move but not > enough to come out. Do I > have to take the steering shaft out? It is driving > me crazy, PLEASE HELP > SOMEONE... > Butch > > > > 64 Dodge 440 > > > ---- > Please address private mail -- mail of interest to > only one person -- directly to that person. I.e., > send parts/car transactions and negotiations as well > as other personal messages only to the intended > recipient, not to the Clubhouse public address. This > practice will protect your privacy, reduce the total > volume of mail and fine tune the content signal to > Mopar topic. Thanks! > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html. > > > > > George ____________________________________________________________________________________Ready for the edge of your seat? Check out tonight's top picks on Yahoo! TV. http://tv.yahoo.com/ ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.