Re: 64 and 65 dodge rear bumpers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 64 and 65 dodge rear bumpers



I can tell you for a fact that the front bumpers on the '65 B-Body 
Dodges and Plymouths are different. The one bolt hole spacings are 
different by abut an inch. Bumper I picked up from a '65 Coronet would 
not fit a '65 Belvedere.

     Akron Don

----- Original Message -----
From: neal zimmerman <neal.zimmerman@xxxxxxxxx>
Date: Tuesday, July 17, 2007 11:33 am
Subject: Re: 64 and 65 dodge rear bumpers
To: 1962to1965mopars@xxxxxxxxxx

> yes the 64polara front bumper is drastically different , and so is the
> 64 plymouth and 65 plymouths, looks like the only luck-out that i know
> ,of.
>  maybe the 63 dodge and 63 plymouths interchange but i doubt it.
>   neal zimmerman, eugene oregon
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.