Re: Holley 4781 double pumper priming?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Holley 4781 double pumper priming?



Alright, I'm a schmuck.  I didn't have as much gas as I thought.  But
I'm still having trouble.  I get what looks like a good squirt now,
but it still won't run.  If I prime it with a cap-full of gas, it
starts to fire a little, but cuts right out.  No sounds of firing at
all without priming.  So, same question; do I need to prime the carb
float bowls?  How?  Thanks.

- Jim

On 7/17/07, Jim Altemose <jaltemoose@xxxxxxxxx> wrote:
I'm trying to install a Holley 4781 double pumper.  I have a Barry
Grant electric fuel pump.  Do I need to prime the carb float bowls
first?  How do I do that?

I'm running the pump and pumping the pedal, but I'm only getting a
minuscule squirt.

Thanks.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge), '65 Belvedere I (Street Wedge), '71 Bronco



--
- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge), '65 Belvedere I (Street Wedge), '71 Bronco


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.