RE: SureGrips,,,

[Jim Jablonski <jim@xxxxxxxxxxxxx>]

I use non-synthetic 80w90 with Dana friction modifier part number 43161. 
 I've always used two bottles during break-in, then 1 bottle afterward.  
You can shop around for good prices; I usually find the best at 4WD 
shops.  Here's one for $4.50 / bottle.

http://www.jbccoffroad.com/frmo2.html

Jim

george smith wrote:
> 
> Think I used 80-90W.Went to Baxters and bought the
> additive that needs to be put in also for the
> suregrip. The additive runs over 10.00 by now.
> --- Dodger7998@xxxxxxx wrote:
> 
> > 
> > 
> > What are you guys using for fluid in you SG rear 
> > ends
> > 
> > 
> > 
> > ************************************** See what's
> > free at http://www.aol.com.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.