I am going to be getting rid of some parts I won't be using. I thought I might mention it here before I put stuff on Ebay. I will give members a very good price. 8 3/4 back braced housing with pads for stock A body, and inboard A body springs, with Mark Williams 489 - billet spool caps, Pro spool and gears - 4:30 - Mark Williams Axels - Wilwood disc brakes. This is as bullet proof as you can make a 8 3/4. A body width on the housing. Various Sure grips. 489's - 742's - I think I have 3:55 - 3:91 - 3:23 - 4:56 Brand new completely rebuilt 742 sure grip - 3:23's - Never run...New gears, bearings, and clutches. CalTrac's for A body - for inboard box - mono-leaf springs. Can be used for outboard springs with new front pivot. Installed, never run. Drag Light rear rims and tires - Drilled for big bolts - Brand new Hoosers - 12" rims - 6 1/2 inch back spacing - 29.5/11.5/15 - 14" of rubber on the ground. - Polished Contact me off list if you have any interest. Would consider trade for a cherry 340 - standard block.... Thanks Earl earlh@xxxxxxxxxxxxxx ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.