Re: Neutral safety switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Neutral safety switch




all you need to do is ground the wire that comes from the  switch up to the 
relay, I usually do it with a short wire from the bolt that  holds to relay to 
the firewall to the contack point on the relay where the wire  coming from the 
trans. is connected



************************************** See what's free at http://www.aol.com.

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.