Re: Regulators and Resistors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Regulators and Resistors





On Jun 29, 2007, at 4:00 PM, Dodger7998@xxxxxxx wrote:



The ballast resistor is used to raise the voltage while cranking the engine,
and lowering it while running,,,,,,,,,,,my recomendations  would be to
convert the ign. system to a later modes ecu unit, this can be easily done with used part from the junk yard, or the purchase of new from your local parts store


Can the ballast be bypassed with this conversion to elec. ignition?


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.