I updated my 62 Dart to a dual reservoir master cylinder a few years back. It still has drum brakes front and rear, and worked fine. About a year ago a shop worked on the car and convinced me the master cylinder needed changing out. I'm pretty sure they didn't put the right one in and now if I really hit the brakes hard the rears lock up. I'm going to change the MC out myself this time. What is the correct year make and model I should ask the parts store for that will give me a bolt-in dual reservoir master cylinder to handle 4 wheel drum brake set-up, that won't lock up the rears prematurely? (I don't think it makes a difference, but just in case, it is a power brake car, w/ original type booster). Thanks for any help. Paul ************************************** See what's free at http://www.aol.com. [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.