Re: 383 exhaust manifold bolt

[Doug Ahern <D170A833@xxxxxxxxxxxxxxxxxxx>]

there are two lengths, a short and a long.  its actually a nut, not
a bolt.  the heads has  a stud like all the other ex. man. studs.

> Do I need to try to find one of these style bolts or can I use a 
> substitute? (I don't care about the car being all-original looking.)

for the driver's side, the original was a threaded end that sticks
out the end and accepts a fine thread bolt.  this is used to hold
a spark plug wire loop.  the YO repops don't accept the fine thread
bolt.,,  FWIW.

oil it done with penetrating fuild and you might save the original.
otherwise use the repop.

Doug


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.