RE: 383 exhaust manifold bolt
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 383 exhaust manifold bolt



I replaced all of mine with a long bolt after buying the approx length 
bushing at the hardware store.  The bolt goes through the bushing (which 
acts like a long washer or spacer).  When done, it looks like the 
original sleeve-nut.  Make sure the bushing is the same outer diameter 
as the sleeve-nut and that the bolt goes through it.

Pat                                                                      
        
Gary H. wrote:
> 
> Hi all,
> 
> I have a 383 exhaust manifold bolt that is broken. See the picture here: 
> 
> http://tinyurl.com/25cfpn
> 
> The bolt is one of those funky Mopar items. 
> 
> See the picture here http://tinyurl.com/28fjsa
> (What I need is somewhat like the top one, I think.)
> 
> Do I need to try to find one of these style bolts or can I use a 
> substitute? (I don't care about the car being all-original looking.)
> 
> Thoughts appreciated.
> 
> Thanks,
> Gary H. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.